| Product Ingredients: |
The aluminum sheets formed of the tape shall be 99.5% purity, 9 microns thick, 50 mm wide, and laminated between two layers of a well-adherent plastic material; As the highest melting temperature is 180 ° C, it becomes a bond between the plates and is water resistant. The sheets mentioned above are coated with a layer of low density polyethylene, and its thickness is not less than 400 microns, so that the width of the base layer of polyethylene is not less than 200 mm. A thin final layer of 100 microns of plastic material is placed on top of the aluminum layer, so that the adhesion is carried out by heat and without adding any adhesives. And the adhesion is complete over the base layer, as well as on the conductive aluminum layer, and the width of the sheet is the same width as the base layer consisting of polyethylene, and it is written on the surface of the top layer in both Arabic and English and in an appropriate font |